Concrete Fencing

Wood grained texture that may be stained.
Consists of:
1 post and 3 planks
Post – 72” T x 5” W
Plank – 8’ L x 5 ½” T x 2 ½” Thick

Cattle Gap

Made with #3 and #4 rebar
There are 3 mats that are tied & correctly spaced for maximum strength & held in place before the concrete is poured
Poured with 4500 psi concrete with fiber mesh mixed in
Frame thickness 3 ½”
5” Openings
80” Wide
    12’ long (12” tall); 6600 lbs:  42 total pieces of steel with 140 ties holding in place
    16’ long (12” tall); 8600 lbs:  46 total pieces of steel with 170 ties holding in place
    12’ long (20” tall); 7720 lbs:  45 total pieces of steel with 140 ties holding in place
    16’ long (20” tall); 10000 lbs:49 total pieces of steel with 170 ties holding in place

Center Line (H) Feeder

Made with an 8’ long continuous piece of 6” x 6” x 10 gauge concrete wire from end to end on both sides and bottom & 3 pieces of #4 rebar
Poured with 4500 psi concrete with fiber mesh mixed in
No square corners, corners are @ 45⁰
8’ long; 5’ wide
Inside width 54”, Walls are 3”
3800 lbs
Ends are available: 150 lbs each with concrete wire in them

Narrow Center Line (H) Feeder

Made with an 8’ long continuous piece of 6” x 6” x 10 gauge concrete wire from end to end on both sides and bottom
Poured with 4500 psi concrete with fiber mesh mixed in
Beveled corners
Has forklift slots for unloading & transport
8’ long
Outside width 32”, height 22”
Inside width 26”, height 14”
2000 lbs
Ends are available and are made on them to make them one piece

Fence Line (J) Feeder

Made with an 8’ long continuous piece of 6” x 6” x 10 gauge concrete wire from end to end on both sides and bottom
Poured with 4500 psi concrete with fiber mesh mixed in
No square corners, corners are @ 45⁰
Has forklift slots for unloading & transport
8’ long
25” Wide @ the base & 34” Wide @ the top
Inside width 20”, front 22” high and back 30” high
2200 lbs
Ends are available and are made on them to make them one piece

Water Trough Slab

Made with 6” x 6” x 10 gauge concrete wire and 6 pieces of #4 rebar
Used with Ritchie Cattle Waters
12” Hole in center for water line
4 recessed hooks
4’ x 6’ x 4” thick; 1100#

Water Trough

Made with 6” x 6” x 10 gauge concrete wire around sides and across bottom
They have a drain hole and the option of 1 or no water inlet in the bottom
Poured with 4500 psi concrete with fiber mesh mixed in
Round water trough with no corners
Equal pressure inside trough unlike rectangular troughs that will freeze at the corners
    6’ diameter; 24” deep, with 3” walls and bottom
    350 gallons; 3000 lbs